SUN EATER AIT
Split for Performance. Built for Anywhere
Split Solar Street Light
The SUN Eater AIT is a high-performance, all-in-two solar street luminaire engineered for flexible installations and maximum solar efficiency. Designed for areas where panel orientation, shading, or pole spacing may pose challenges, the AIT separates the LED light head from the solar module—offering enhanced positioning and optimized energy capture. Equipped with a long-life LiFePO₄ battery, MPPT charge controller, and high-efficacy LUMILEDS chips (up to 177 lm/W), the AIT is built for 24/7 reliability. Intelligent lighting controls, motion sensing, and IOT connectivity ensure adaptive performance even in demanding environments. Whether lighting roadways, parks, industrial areas, or trail corridors, the SUN Eater AIT delivers sustainable lighting with no compromise on output or durability.
Applications
Roadways
Area
Parking lots
Hiking / Loop trails and parks
Pathways
Sensitive wildlife areas
Key Features
No trenching or wiring required
Easy installation
AIT (All in two) design with modular components
Runs 2-3 consecutive days on intelligent mode
Immune to power outages from grid failure or natural disasters and copper wire theft
Additional finishes and fixture options available for customization
-
Technical Specifications
Type - Area Luminaire, Solar All In Two (AIT), Split
Construction
Salt Spray Tested, Heavy-duty die-cast aluminum (EN AC-46100)
Stainless, vandal resistant fasteners
Pre-drilled for installation
Finish
Anti-UV thermosetting polyester / 80 micron epoxy primer + Anti-UV thermosetting polyester (for extremely corrosive environments)
IP Rating
IP65, according to standard EN 60529
Finish Color
Standard Silver gray
Custom color on request, C5-grade painting
-
Mounting Options
Complete kit for mounting panel/battery and luminiare
Luminaire mountable with standard slip fitter on 2 3/8” tenon, side entry
Panel and battery combo mounted on 180° adjustable 2 3/8” tenon, post top
Pole Recommendations
Ideal for retrofitting to existing poles with a mounting arm or new projects. Our product team will ensure you have everything you need to make your installation run smoothly.
Pole Shapes
Round
Square
Tapered / Straight
Pole Heights - Suitable to mount from 10’ to 39’
Pole Composition
Steel
Aluminum
Fibreglass
-
Intelligence
Intelligent mode increases autonomy, reduces battery consumption and maximises lighting conditions with minimal disruption to surrounding environment
Controllers
Motion detector
Photocell sensor
Optional field programming remote
Interactive timing and dimming
LED Specs
Model LUMILEDS 3030 / 5050 model
Lens Polycarbonate
Efficacy 177lm/W
Lumens 3,520 - 16,800lm
CRI 70Ra, 80Ra, 90Ra Optional
Beam - Type-II (85*150°, 110*155°, 75*150°) / Type III (100*160°, 90*150°, 100*145°) / Type IV (115*145°)
Color Temperature & Wavelength Options
3000K
4000K
5000K
Amber wavelength (Wildlife friendly) 589.9nm
Lifetime Rating
100,000hr LED L70 Lifetime
Driver
Commercial, high efficacy LED driver
Integrated light distribution technology
Intelligent mode reduces light decay and maximizes lifetime LED modules
Power
Solar Panel - Single crystal photovoltaic panel
Battery
Li-ion Battery - LiFe PO4, 12.8V - 25.6V, 54-102AH
Charging Time - 8hrs
Battery Lifespan - >2000 times cycle
Maximum Autonomy - Operate 3~5 rainy days under intelligent model
-
Warranty
Certified for extreme temperatures and humidity
10+ yr battery life
10 yr warranty
20 year lifespan
Engineered for harsh environments
Photometrics
Engineered to focus light payoff where you need it most, our standard lighting distributions give you options while the field adjustable LED modules provide flexibility on site at installation. All distributions are DarkSky compliant, avoiding bleed and light pollution.
We recommend a lighting plan is created for each installation, guiding proper orientation and placement for best practices.
